Using Buffer Print - IBM 5225 Operator's Manual

Using Buff er Print
Buffer Print is used by system programmers and service personnel during program
testing and troubleshooting.
Before operating the printer in Buffer Print, ensure that it is loaded with forms that
are at least 375 millimeters (14.8 inches) wide.
Follow these steps to operate Buffer Print:
Step 1
Place the Mode Switch in the
Buffer Print position.
Step2
Press the Start key.
Printing starts when data
is
received from the host.
One Line
D
Start
An example of Buffer Print is shown on the next page.
Operating Procedures 5-13