Backhaul FM4200 Mobi
Cisco Ultra-Reliable Wireless
Unit
FM10000 Gateway
(Gen. 1)
FM10000 Gateway
(Gen. 2)
3.2. Fluidmesh architecture
3.2.1. Overview
Wireless network architectures
Depending on the network design and the type of components used, the
Cisco FM4200 Mobi can be used to create wireless network architectures,
including:
• Point-to-point (P2P) links.
• Point-to-multipoint (PTMP) sectors.
• Mesh networks.
• Mobility networks.
• Mixed networks that are capable of using any combination of types
listed above.
The FluidMAX TDMA protocol
Individual radio transceivers can easily be assigned different roles within
the same network, using Fluidmesh's patented FluidMAX™ technology. A
typical example of a general network architecture that uses a combination
of Fluidmesh components is shown below:
© 2020 Cisco and/or its affiliates. All rights reserved.
Maximum power consumption (realistic system-
design assumption)
275 Watts (redundant AC power supply)
250 Watts (non-redundant AC power supply)
300 Watts (redundant AC power supply)
Page 15 of 177