Changing The Light Bulb - Singer 6038 Instruction Book

Changing the light
bulb
BEFORE CHANGING LIGHT BULB, UNPLUG
MACHINE FROM ELECTRIC OUTLET.
Use original SINGER light bulbs only (code 988076).
Removing light bulb (illustration.1)
1. Remove screw located on the back of face plate and
remove plate pulling it down and to the right.
2. Do not attempt to unscrew the light bulb. Push bulb
up into the socket and at the same time, turn it to
the direction indicated (clockwise) to unlock bulb pin
(illustration 2).
3. Pull bulb down and out of machine.
Replacing bulb (illustration 3)
1. Push new bulb into socket, tining up the side pins into
the slots of the socket. Push it up and turn to the
indicated direction (counter clockwise) to lock into
position.
2. Replace face plate again and tighten screw.