Table of Contents
Advertisement
S
l
N G E R
8. To pass the thread through the spiral thread guide,
start from the left, making a circular clockwise
movement with your hand twice. The thread will
slideinsidethecenterof thespiral (illustration 7).
9. Pass the thread through the last thread guide and
turn hand wheel toward you until needle is in its
highest position. Lower press foot.
10. Lower needle threader lever slightly down and pass
the thread
through the guide as shown in the
illustration 8. Continue lowering the lever until
hook pass inside the needle eye.
11. Insert thread in the hook slot and lead it slightly up
(illustration 9).
12. Loosen the lever slightly and the thread will pass
through the needle eye automaticaly.
13. The thread will produce a loop. Pull loop about 10
cm, opening it with your fingers.
Note:
We recommend to set machine in the straight
stitch position, the needle in central and in its
highest position, and the presser foot lowered to
make this operation easier.
Co)
Advertisement
Table of Contents
