Esc ? N; Esc - Epson TM-U925 Manual

ESC ? n

[Name] Cancel user-defined characters
[Format] ASCII
Hex
Decimal
32 £ n £ 126
[Range]
[Description] Cancels the specified user-defined characters.
· This command deletes the defined pattern for the character code specified by n in the
[Notes]
selected font.
· After defined pattern is deleted, the printer prints the same pattern for the internal
characters.
· The printer ignores this command when the value of n is out of the specified range and
when the specified character code is not defined.
[Reference] ESC &, ESC %

ESC @

[Name] Initialize printer
[Format] ASCII
Hex
Decimal
[Description] Clears the data in the print buffer and resets the printer mode to the mode that was in
effect when the power was turned on.
· The DIP switches are not checked again.
[Notes]
· The data in the receive buffer is unchanged.
· When this command is executed in slip paper mode, the printer ejects the slip and
switches from slip mode to paper roll mode.
EPSON
ESC ? n
1B 3F n
27 63 n
ESC @
1B 40
27 64
TITLE
TM-U925
Specification
(STANDARD)
SHEET NO.
REVISION
NEXT
A
75
SHEET
74