Esc 2; Esc 3 N; Esc - Epson TM-U925 Manual

ESC 2

[Name] Select 1/6-inch line spacing
[Format] ASCII
Hex
Decimal
[Description] Selects 1/6-inch line spacing
[Note] This command is available only for the paper type(s) selected by ESC c 1.
[Reference] ESC c 1

ESC 3 n

[Name] Set line spacing
[Format] ASCII
Hex
Decimal
0 £ n £ 255
[Range]
[Description] Sets the line spacing to [ n ´ (vertical motion unit)] inches.
[Note] This command is available only for the paper type(s) selected by ESC c 1.
[Default] n = 24 (1/6 inch)
[Reference] ESC c 1, GS P
ESC <
[Name] Return home
[Format] ASCII
Hex
Decimal
[Description] Moves the print head to the left-most position, then moves it to the right-most position.
· The left-most end is detected by the home position sensor.
[Notes]
· Since the home position is detected when this command is executed, the printing
position may shift.
EPSON

ESC

2
1B 32
27 50
ESC 3 n
1B 33 n
27 51 n
ESC <
1B 3C
27 60
TITLE
TM-U925
Specification
(STANDARD)
SHEET NO.
REVISION
NEXT
A
72
SHEET
71