Paper - Epson TM-U925 Manual

1.7 Paper

1) Paper feed method:
2) Paper feed pitch:
3) Paper feed speed:
4) Paper size:
a)Paper roll (single-ply)
À Quality:
Á Size:
 Thickness:
à Weight:
Ä Paper roll spool inside diameter:
b) Slip paper
À Paper type:
Á Total thickness:
 Size (W ´ L):
à Ambient temperature and copy capability
Copy capability is greatly influenced by the ambient temperature, so printing must be
performed under the conditions described in Table 2.6.1.
Table 2.6.1
Number of copies
Original + 4 copies
Original + 1 to 3 copies
EPSON
Friction feed
Default 1/6 inch
Can be set in units of 1/144 inch by the ESC 3 and ESC J commands.
Approximately 60.3 ms/line (1/6 inch feeding)
Approximately 3.4 inches/second (continuous feeding)
High
Width: 69.5 mm ± 0.5 mm (2.74" ± .02")
Maximum outside diameter: 83 mm (3.27")
0.06 to 0.09 mm (.0024 to .0035")
52.3 to 64.0 g/m
(45 to 55 Kg (20.41 to 24.94 lbs)/1000 sheets/788 mm ´ 1091 mm
(31.02" ´ 42.95"))
10 mm (0.39") or more
ù Normal paper
ù Carbon copy paper
ù Pressure sensitive paper
0.09 to 0.36 mm (.0035 to .0141") (Refer to b)-Ä below)
70 mm ´ 70 mm to 210 mm ´ 297 mm (A4 size)
(2.76" ´ 2.76" to 8.27" ´ 11.69")
Number of Copies and Ambient Temperature
Ambient temperature (print mode)
Approximately 20° to 40°C (68° to 104°F) (copy mode)
5° to 40°C (41° to 104°F) (copy mode)
TITLE
TM-U925
Specification
(STANDARD)
2
(13.9 to 17 lbs) (JIS P8124)
SHEET
REVISION
A
NO.
NEXT SHEET
6 5