Epson TM-U925 Manual page 34

MICR command lists (when the printer is used with the MICR reader)
Command
DLE EOT BS
FS a 0
FS a 1
FS a 2
FS b
FS c
(*) NOTE:
The vertical and horizontal motion units are used to set the minimum pitch by software instead of by
mechanical pitch. Using vertical and horizontal motion units minimizes dependence on the mechanical
pitch for setting, (e.g., the paper feed amount and enables the printing position to be set in inches.
(Refer to GS P))
EPSON
Real-time transmit MICR status transmission
Read check paper
Load check paper to print starting position
Eject check paper
Request retransmission of check paper reading result
MICR mechanism cleaning
TITLE
TM-U925
Specification
(STANDARD)
Name
SHEET NO.
REVISION
NEXT
A
SHEET
27 26