Epson TM-U925 Manual page 29

Table 2.2.2 Drawer Kick-out Connector Pin Assignments
Pin Number
1 Frame GND
2 Drawer Kick-out driver signal 1
3 Drawer open/close signal
4 +24V
5 Drawer kick-out drive signal 2
6 Signal GND
3) Drawer Kick-out drive signal
Output signal:
CAUTION: To avoid an overcurrent, the resistance of the drawer kick-out solenoid must be 24W or
more.
Output waveform:
Figure 2.2.4
EPSON
Signal name
Output voltage: Approximately 24 V
Output current: 1 A or less
Outputs the waveforms in Figure 2.2.4 to the points A and B in Figure
2.2.5.
t1 (ON time) and t2 (OFF time) are specified by ESC p.
Drawer Kick-out Drive Signal Output Waveform
TITLE
TM-U925
Specification
(STANDARD)
Direction
--
Output
Input
--
Figure 2.2.3 Drawer Kick-out Connector
Output
--
SHEET
REVISION
A
NO.
NEXT SHEET
22 21