Dedicated Signal Stalker Ii - Radio Shack PRO-652 User Manual

Dedicated Searches

Dedicated Signal Stalker II

Dedicated STLK mode lets you access and run Signal Stalker II easily
and quickly.
In Manual, Program or Scan mode, press FUNC SCAN to access the
Signal Stalker II dedicated mode.
Note: When a signal is being received, the
changes to
FrL/O
FUNC F1 when the F1 key function is
Operation of the dedicated Signal Stalker II mode is almost identical
to that of the object mode, with one exception. When dedicated
Signal Stalker II mode is used, you may press the numeric key on
the keypad that corresponds with the sub-band you wish to enable
or disable. Disabling a sub-band will cause the Signal Stalker II
system to skip the frequencies within that sub-band as it performs its
sweeps.
Signal Stalker II sub-bands:
. You can access the
Freq. (MHz)
0 25-54 MHz
1 108-137
2 137-174 MHz
3 216-300
4 300-406
5 406-470
6 470-512
7 764-806
8 806-869
9 896-1300 MHz
60
softkey (F1)
Band
softkey by pressing
Band
FrL/O.
Band
VHF Low Band
VHF Aircraft Band
VHF High Band
220 MHz Commercial/
Amateur Band
UHF Military Air Band
UHF Band
UHF-T Band
700 MHz Band
800 MHz Band
900 MHz Band, 23 cm
Amateur Band