Canon EOS C300 Mark II Instruction Manual page 205

Menu item
[Fan Mode]
[Fan Speed (STBY)]
[Fan Speed (REC)],
[Fan Speed (Always)]
[Fan Speed]
[Touch Screen Response]
[Review Recording]
3
[GPS Auto Time]
[Button Illumination]
[DC IN Warning (V)]
4
[Exp. Unit Batt. Warning (%)]
4
[Exp. Unit Batt. Warning (V)]
[Power Saving Mode]
[Retract Lens]
[Reset Hour Meter]
[Firmware]
[Camera]
[Lens]
1
The default value depends on the country/region of purchase.
2
Only when an optional expansion unit is attached to the camera.
3
Only when the optional GP-E2 GPS Receiver is connected to the camera.
4
Only when the optional EU-V2 Expansion Unit 2 is attached to the camera with a commercially available V-mount battery
attached.
Setting options and additional information
[Automatic], [Always On]
[Maximum], [High], [Middle], [Low]
[High], [Middle], [Low]
[High], [Middle], [Low]
[Normal], [Low]
[Entire Clip], [Last 4 sec]
[On], [Off]
When this setting is set to [On], the camera automatically adjust its date and time settings according to
the information received from the GPS signal. The date and time will be updated automatically the first
time a correct GPS signal is acquired after turning on the camera. This setting is available only in CAMERA
mode.
• While the automatic date/time adjustment is activated, the
Time] setting will not be available.
• The time will not be updated while recording video.
[On], [Off]
11.5 V to 15.0 V in 0.1 V intervals (12.0 V)
1% to 10% (5%)
12.0 V to 15.0 V in 0.1 V intervals (13.0 V)
[On], [Off]
When this setting is set to [On], the camera's power consumption is reduced.
• The following functions cannot be used when this setting is set to [On]:
- > [¢ Monitoring Setup] > [LCD LM-V1 Luminance], [LCD LM-V2 Luminance] or
[EVF-V70 Luminance].
- > [ Network Settings] > [Network].
- > [¢ Monitoring Setup] > [LUT Selection: VIDEO Terminal] > [HDR Assist. (400%)] or
[HDR Assist. (1600%)].
[On], [Off]
When one of the following lenses is attached to the camera and the focus mode switch on the lens is set
to AF, if this setting is set to [On], the lens will retract fully when the camera is turned off. This setting is
available only in CAMERA mode.
• EF 40mm f/2.8 STM • EF-S 24mm f/2.8 STM
–
The camera has two "hour meters" – the first keeps track of total operation time and the second keeps
track of operation time since the last time the second hour meter was reset with this function. This setting
is available only in CAMERA mode.
–
Displays the current firmware version of the camera and is used to update the firmware. This setting is
available only in CAMERA mode but is usually grayed out.
–
Menu Options
> [B System Setup] > [Date/
• EF 50mm f/1.8 STM
(A 61)
205
(A 61)
(A 31)
(A 116)
(A 138)
(A 27)
(A 38)