Recording remotely using the Remote Camera Control Application
During recording, you can check the angle of view using Live View and adjust various picture related settings.
For details about connection/setup and the Remote Camera Control Application, refer to the Remote Camera
Control Application manual.
NOTES
• The following functions are not available when operating the camera from the Remote Camera Control
Application.
- Menu
[Camera Power]
[Operational Settings]:
[Keyboard Shortcuts] > [Pan Left]. [Pan Right], [Tilt Up], [Tilt Down], [Pan/Tilt Left and Up],
[PTZ Direction Settings]
[Preset/Trace Settings]:
[Preset] > [Preset List] > [Preset Name], [Camera Settings]
[Trace]
[Camera Settings Page]
[Register] > Camera Setup
- Camera controls
[Basic] tab:
[PTZ/Focus] > [Pan/Tilt Speed], [Pan/Tilt]
[Preset] > [Speed Level]
[Exposure] > All shooting modes
[Exposure] > [ISO]/[Gain] > [Auto]
[Exposure] > [ND filter] > [Auto]
[White Balance] > [R Gain], [B Gain]
[Trace]
[Details] tab:
[Image Quality] > [Knee: Automatic]
[Exposure] > [Infrared] and [Enhanced ND Filter]
[Other Functions] > [Wiper]
• Even when camera operation is disabled by key lock, operation is possible using the Remote Camera Control
Application (A 12).
• When adjusting custom picture related settings, refer to
(A 190).
Recording remotely using an XC Protocol compatible controller/application
[Pan/Tilt Right and Up], [Pan/Tilt Left and Down], [Pan/Tilt Right and Down],
[Pan/Tilt Speed +], [Pan/Tilt Speed -], [Prepare Trace], [Execute Trace],
About changing custom picture related settings
191