Reviewing A Recording - Canon EOS C300 Mark II Instruction Manual

Reviewing a Recording

Reviewing a Recording
If you set an assignable button to [Review Recording] in advance, you can review all or part of the last clip
recorded even with the camera set to CAMERA mode.
116
1 Set an assignable button to [Review Recording] (A 125).
2 Select
3 After you finish recording a clip, press the assignable button.
• The last clip that was recorded is played back for the selected duration. [Ð REVIEW] appears at the top of
the screen.
• While the clip is reviewed, there will be no sound from the built-in speaker but the audio will be output from
the × (headphone) terminal, MON. or HDMI OUT terminal and SDI OUT terminal.
• You can use the joystick to jump back/forward within the clip (A 143).
• Press the CANCEL button to stop reviewing the clip and return to record standby mode.
• After the clip finishes playing back, the camera returns to record standby mode.
Options
[Entire Clip]: Allows you to review the entire clip.
[Last 4 sec]: Allows you to review just the last 4 seconds of the clip.
NOTES NOTES
• If the camera switched cards during a recording, the camera will play back the clip on the card most recently
recorded on.
B
> [ System Setup] > [Review Recording] > [Entire Clip] or [Last 4 sec].