Applying A Lut To Video Outputs - Canon EOS C300 Mark II Instruction Manual

Applying a LUT to Video Outputs

While recording using special gamma curves, you can apply a LUT to the image displayed on external monitors
(SDI OUT terminal, MON. terminal, HDMI OUT terminal), the supplied LCD screen (VIDEO terminal) or an optional
viewfinder. When a LUT is applied, the displayed image will look as if a standard gamma curve were used,
making it easier to check the image on the display device used. To check the image on an external monitor, you
will need a monitor that is compatible with the video's color space.
You can also load and apply LUT files created with Blackmagic Design's DaVinci Resolve (A 159).
Available LUTs
The available LUTs depend on the [Gamma/Color Space] and [Look File] settings in the custom picture file
(A 132). If these settings are changed, LUT will be turned off.
Custom picture file
[Look [Gamma/Color Space]
File] after the Look File is applied
[Off] –
[Conform to Custom Picture]
[SDR BT.709]
[On] [SDR BT.2020]
[HDR PQ (BT.2100)]
[HDR HLG (BT.2100)]
SDR stands for Standard Dynamic Range.
Selectable LUTs (when A)
Custom picture file
[Gamma/Color Space]
[Canon Log 2 / C.Gamut]
[Canon Log 3 / C.Gamut]
[Canon Log 3 / BT.2020]
[Canon Log 3 / BT.709]
[PQ / BT.2020]
[HLG / BT.2020]
[BT.709 Wide DR / BT.2020]
[BT.709 Wide DR / BT.709]
[BT.709 Normal / BT.2020]
[BT.709 Normal / BT.709]
[BT.709 Standard / BT.709]
[Canon 709 / BT.709]
1
Not available for the VIDEO terminal (supplied LCD monitor/optional LV-M1 LCD Monitor/optional EVF-V70 OLED Electronic
Viewfinder).
2
Available only for the VIDEO terminal (supplied LCD monitor/optional LV-M1 LCD Monitor/optional EVF-V70 OLED Electronic
Viewfinder).
1 To apply the LUT to the supplied LCD screen, select
Term.] > [On].
¢
2 Select > [
• The gamma curve and color space of the video output will change.
1
[BT.709] [BT.2020]
– –
Ü
–
Ü
–
Ü
–
1 1
[BT.709] [BT.2020] [DCI]
Ü Ü Ü
Ü Ü Ü
Ü Ü
–
Ü
– –
Ü
– –
Ü
– –
Ü
– –
– – –
– – –
– – –
– – –
– – –
Monitoring Setup] > [LUT Selection: VIDEO Term.] > Desired LUT.
Available LUTs
1
[PQ] /
1
[DCI] [ACESproxy]
1
[HLG]
A (See the following table.)
– – –
– – –
– – –
– – –
Available LUTs
1 1
[PQ] [HLG] [ACESproxy]
Ü Ü Ü
Ü Ü Ü
Ü Ü
–
– – –
– – –
– – –
– – –
– – –
– – –
– – –
– – –
– – –
¢
> [ Monitoring Setup] > [LUT: VIDEO
Applying a LUT to Video Outputs
[HDR Assist. [HDR Assist
1
[CMT 709]
2
(1600%)]
– –
– –
Ü
–
– –
[HDR
1
[CMT 709] Assist.
2
(1600%)]
Ü Ü
Ü Ü
Ü
–
– –
Ü
–
– –
– –
– –
– –
– –
– –
– –
157
2
(400%)]
–
–
Ü
Ü
[HDR
Assist.
2
(400%)]
Ü
Ü
Ü
–
Ü
Ü
–
–
–
–
–
–