Configuring Connection Settings - Canon EOS C300 Mark II Instruction Manual

Configuring Connection Settings

Configuring Connection Settings
To connect to a network you will need to define in advance a connection setting (SET), which is a combination of
one or two communication settings (networks, NW) and one or two network function settings (MODE). You can
166
save in the camera up to 25 individual communication settings and function settings, and up to 20 combinations
of connection settings (SET1 to SET20).
To configure a connection setting for the first time, you will follow the setup wizard (A 167). Using the wizard,
you can set up only one network and one function per connection setting. After having configured multiple
connection settings, you can change them (for example to add a secondary network or second function) and
you can create new ones combining existing communication and function settings (A 174).
Configure the necessary connection settings for the networks and network functions you wish
to use.
Connection setting (SET)
Step 1
Select a connection setting appropriate for the network function you wish to use and start using
the function.
Step 2
FTP transfer (A 180)
IP streaming (A 181)
Browser Remote (A 183)
XC Protocol (A 190)
Communication Communication
Setting 1* (NW)
* Configured using the wizard.
** Only in CAMERA mode.
Wi-Fi
Camera Access Point
Infrastructure
WPS (push button)
WPS (PIN code)
Detected access points
SSID/authentication mode input
Ethernet
Function
Setting 2 Setting 1* (MODE)
Function
Setting 2**
FTP transfer
IP streaming
Browser Remote
XC Protocol