Reference Video Signal Output - Canon EOS C300 Mark II Instruction Manual

Synchronizing with an External Device
• If the external Genlock signal is incorrect, the synchronization may not be stable. In such case, the recorded
time code may be incorrect.
101

Reference Video Signal Output

After changing the function of the optional EU-V1's or EU-V2's G-LOCK/SYNC OUT terminal, you can use the
camera's video signal as a reference sync signal (tri-level HD signal) to synchronize an external device to this
camera. The reference signal's configuration is determined by the video output configuration of the SDI OUT
terminal and other menu settings.
1 Select > [B System Setup] > [G-LOCK/SYNC Term.] > [HD Sync Output].
2 If necessary, select > [B System Setup] > [SYNC Scan Mode] > [P] or [PsF].