Replacing the filter
1
2
Removing and cleaning the spray arm
spray arm
impeller
Refitting the spray arm
32
MAINTENANCE
Align the filter cap with the notch on the
filter base. Click together to secure.
Place the filter back into the tub by aligning
the arrow to the
clockwise until the arrow aligns with
clicks into position.
Lift the spray arm off the impeller, pulling up from
the centre. Shake to dislodge any loose particles,
rinse under running water and wipe with a damp
cloth. Ensure the magnet is clean and clear and that
water can flow through all holes.
Place the spray arm onto the impeller. Ensure
that the arm rotates freely when refitted.
on the filter. Rotate
and