Panasonic AW-PH300 Operating Instructions Manual page 7

© Tilting Arm (supplied)
This arm tilts the head
B Tilting Arm Fixing Screws (supplied)
4 screws are supplied to fasten the tilting arm
© Camera Mounting Plate (supplied)
Used to fasten the camera
© Camera Guide Pin
This pin sets the mounting direction of the camera
© Camera Mounting Screw
This screw fastens the camera (U 1/4"-20 UNC)
O Panning Head
The head rotates in panning directions
@ Tally Indicators (2 pcs )
A selection signal lights them red
© Camera Connector Panel
To connect a camera and lens
Q Base
@ Mounting Holes
There are 4 holes to mount the panftit head
+
@ Wire Rod Mounting Hole
To pass a wire to prevent the panftilt head from falling
@ Control Connector Panel
To connect a Control Panel (AW-RP301, RP305, or
RPSO1) or the Multiport Hub (AW-HB505) and Pan/ult
Head AC Adapter (AW-PS300)
(DB Side Blank Panel
A spare to be used in changing the mounting position
of Control Connector Panel @
@ Bottom Blank Panel
A spare to be used in changing the mounting position
of Control Connector Panel B