Panasonic AW-PH300 Operating Instructions Manual page 13

e Turn the panel 180°, and place it back in position e Use plain and spring washers and hex nuts with the
e Fasten the panel with the screws hex bolts as shown in the figure
e Use a wrench of the size thai fits the hex bolt head to
tighten the hex bolts
e To mount the panftilt head suspended, pass wire
through the anti-drop wire hole and fasten the panftilt
head to a ceiling or other firm object, securing it with
the wire
e Have a wire ready strong enough to bear the overall
weight of the panftilt head, camera and lens
+ In mounting the panftilt head, never forcibly turn the
head or tilting arm in the arrow directions bv hand
) _ Control Connector
Panel
E Mounting the Panfilt Head
Observe the following instructions for mounting the
panftilt head
Failure to observe these instructions could cause the
panftilt head to come off or drop, possibly resulting in
an accident
e To mount the panftilt head, use the 4 mounting holes
and fasten the head securely
+ Have M6 hex bolts ready for mounting the head
e The hex bolts must be long enough to meet the
requirement "mounting material thickness (t) plus 25
mm or longer '
SEE