Panasonic AW-PH300 Operating Instructions Manual page 21

Resetting the Operating Range Lower Limit
Keep the MEMORV Switch on the control panel
depressed, then simultaneously press PRESET-7
Switch and PRESET-8 Switch for 5 seconds or more
When the LED of PRESET-10 Switch lights, it indicates
that the limit has been reset Release the switches
Resetting the Operating Range Left Limit
Keep the MEMORY Switch on the control panel
depressed, then simultaneously press PRESET-1
Switch and PRESET-6 Switch for 5 seconds or more
When the LED of PRESET-10 Switch lights, it indicates
that the limit has been reset Release the switches
Resetting the Operating Range Right Limit
Keep the MEMORY Switch on the control panel
depressed, then simultaneously press PRESET-4
Switch and PRESET-9 Switch for 5 seconds or more
When the LED of PRESET-10 Switch lights, it indicates
that the limit has been reset Release the switches
-19-
E Setting the Limiters Again
The same operation alternately applies to setting the
limiters and resetting the limiters
To set the limiters again, reset the limiters and repeat
the steps for setting the limiters
The existing limiter settings can be set again by taking
the following steps
Reset the desired limits by following the procedures
described in Resetting the Limiters
set the desired limits again by following the procedures
described in Setting the Limiters