Table of Contents
Advertisement
Connections for Playback
You can use this camcorder as a VCR by connecting it to your TV for playback. There are some ways to
connect your camcorder as shown below. It is recommended to use the house current as the power
source (p.19).
Connecting to a TV without Video/Audio Input Jacks
Connect the camcorder to the TV using the supplied RFU adaptor. Set the channel selector on the RFU
adaptor and your TV channel to VHF channel CH3 or CH4, whichever is not active in your area. With
this connection, the sound is monaural.
3CH/4CH
a.
Signal flow
Connecting to a TV with Video/Audio Input Jacks or VCR
For Stereo Models (CCD-TR72/TR80)
Connect the camcorder to your TV by using the supplied connecting cable. Set the TV/VCR selector to
VCR on the TV, When connecting the camcorder to VCR, set the input selector on the VCR to LINE.
—.:
Signal flow
If your TV or VCR is monaural type, connect only the white plug for audio on both the camcorder and
the TV or the VCR. With this connection, the sound is monaural.
Advertisement
Table of Contents
