Sharp MX-C528P User Manual page 90

Use printer menus
Menu item
Network Address
UAA
LAA
PCL SmartSwitch
On*
Off
PS SmartSwitch
On*
Off
Job Buffering
On
Off*
Mac Binary PS
Auto*
On
Off
Wi‑Fi Direct
Menu item
Enable Wi‑Fi Direct
On
Off*
Wi‑Fi Direct Name
Wi‑Fi Direct Password
Show Password on Setup Page
Off
On*
Preferred Channel Number
1–11
Auto*
Group Owner IP Address
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
View the network addresses.
Set the printer to switch automatically to PCL emulation when a print
job requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine
incoming data and uses the default printer language specified in
the Setup menu.
Set the printer to switch automatically to PS emulation when a print
job requires it, regardless of the default printer language.
Note: If PS SmartSwitch is off, then the printer does not examine
incoming data and uses the default printer language specified in
the Setup menu.
Temporarily store print jobs in the hard disk or intelligent storage
drive (ISD) before printing.
Note: This menu item appears only when a hard disk or an ISD is
installed.
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
•
On processes raw binary PostScript print jobs.
•
Off filters print jobs using the standard protocol.
Description
Set the printer to connect directly to Wi-Fi devices.
Specify the name of the Wi‑Fi Direct network.
Set the password to authenticate and validate users on a Wi‑Fi connection.
Show the Wi‑Fi Direct Password on the Network Setup Page.
Set the preferred channel of the Wi‑Fi network.
Specify the IP address of the group owner.
90