Table of Contents
Advertisement
Set up, install, and configure
•
To customize an app name, select the app name, click Edit, and then assign a name.
•
To restore the name of an app, select the app name, click Edit, and then select Restore app label.
•
To add a space between apps, click
•
To arrange the apps, drag the app names in the order that you want.
•
To restore the default home screen, click Restore home screen.
4
Apply the changes.
Using Display Customization
Before using the application, make sure to do the following:
•
From the Embedded Web Server, click Apps > Display Customization > Configure.
•
Enable and configure the screen saver, slideshow, and wallpaper settings.
Managing screen saver and slide show images
1
From the Screen Saver and Slideshow Images section, add, edit, or delete an image.
Notes:
•
You can add up to 10 images.
•
When enabled, the status icons appear on the screen saver only when there are errors, warnings, or
cloud‑based notifications.
2
Apply the changes.
Changing the wallpaper image
1
From the home screen, touch Change Wallpaper.
2
Select an image to use.
3
Apply the changes.
Running a slide show from a flash drive
1
Insert a flash drive into the USB port.
2
From the home screen, touch Slideshow.
Images appear in alphabetical order.
Note: You can remove the flash drive after the slide show starts, but the images are not stored in the
printer. If the slide show stops, then insert the flash drive again to view the images.
Managing bookmarks
Creating bookmarks
Use bookmarks to print frequently accessed documents that are stored in servers or on the web.
1
Open a web browser, and then type the printer IP address in the address field.
, select BLANK SPACE, and then click Add.
21
Advertisement
Table of Contents
