Table of Contents
Advertisement
WARNING KEEP BATTERIES OUT OF REACH OF CHILDREN.
Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns
and potential perforation of the oesophagus.
If you suspect your child has swallowed or inserted a button battery immediately call the
24-hour Poisons Information Centre on 13 11 26 for fast, expert advice.
Examine devices and make sure the battery compartment is correctly secured, e.g.
that the screws or other mechanical fasteners are tight. DO NOT use if compartment is not secure.
Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous and may be a choking hazard.
Inform others about the risk associated with button batteries and how to keep their children safe.
Remove the batteries if the remote is not going to be use for prolonged periods. This will help prevent damage from leaking
batteries. If leakage has occurred and corrosion is evident the remote will need to be replaced.
Leaking chemicals are toxic and MUST NOT be touched or ingested.
NEVER mix old and new batteries.
DO NOT immerse the remote control in any liquid, this will damage the remote control, rendering it inoperable and voiding
its warranty.
Battery Installation (CR2032)
•
Slide the battery into the holder as shown with the
positive side facing up (Figure 5).
•
Put the battery into the installation site and make sure
the positive side of the battery is in accordance with
the positive side of installation site.
•
On the first power up set the time of day. If the system
is exposed to a power outage the battery will maintain
the time of day. If the displayed time is not correct
once power is restored replace the battery.
Rinnai
11
Figure 5.
DRCi R32 Wired Controller OIM
Advertisement
Table of Contents
