Rinnai CNTRLDRCIPW Operation And Installation Manual page 43

•
Make sure your devices are powered on.
•
Keep your mobile phone close enough to your device when
NOTE
you are connecting network to your device.
•
Connect your mobile phone to the wireless network at home,
and make sure you know the password of the Wireless Network.
•
Check if your router supports 2.4 GHz Wireless Network band
and turn it on. If you are not sure whether the router supports
2.4 GHz band, please contact the router manufacturer.
•
The device cannot connect to the Wireless Network that
requires authentication, and it usually appears in public area
such as hotels, restaurants, etc. Please connect to a Wi-Fi that
does not require authentication.
•
It is recommended to use a Wireless Network name that only
contains letters and numbers. If your Wireless Network name
contains special characters, please modify it in the router.
•
Turn off the WLAN+ (Android) or WLAN Assistant (iOS)
function of your mobile phone when connecting network to
your devices.
•
If your device was previously connected to the Wireless
Network and needs to reconnect, please click "+" on app Home
page, then add your device again by the device category and
model according to the instructions on app.
Rinnai 43 DRCi R32 Wired Controller OIM