Installation - Rinnai CNTRLDRCINW Operation And Installation Manual

Standard wired remote controller
Hide thumbs Also See for CNTRLDRCINW:
Table of Contents

Advertisement

Installation

120 mm
Backing plate
Remove the backing plate by inserting
a flat screwdriver in the lower part of the
controller, rotate (do not pry up and down) to
remove the backing plate.
The PCB is mounted in the upper part of the
controller be careful not to damage.
Fasten the backing plate on the wall with three
screws (ST3.9*25) and plugs (provided).
20 mm
46 mm
60 mm
Screwdriver
locations
Backing
plate
| 5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents