Table of Contents
Advertisement
2.2
DIMENSIONS
Backing Plate
Figure 2. Dimensions
Front Cover
Internal PCB Plate
Figure 3. Components
Rinnai
Front Cover
Backing Plate
3.0 INSTALLATION
3.1
SMART PORT WIRING
Determine wiring configuration of your Smart Port before
commencing.
For installations without wired controller, refer to Section 3.3.
For installations with wired controller, refer to Section 3.4.
3.2
LOCATION
•
Indoors only
•
Internal plaster wall or ceiling
The Smart Port shall be positioned in a waterproof environment
within 10m of your wireless router (where applicable) to ensure
reliable communication. If this distance is more than ten meters
the transmitting signal may be predisposed to interruption. Please
consult your installer in the first instance if this issue is identified.
The environment must not exceed a temperature of 70°C and
relative humidity of 85%.
The Smart Port MUST NOT be installed inside
any appliance cabinet as this will adversely affect
the Wi-Fi connection. Do not position outside or
IMPORTANT
under floor.
10
Wi-Fi Smart Port OIM
Hide quick links:
Advertisement
Table of Contents
