Table of Contents
Advertisement
8. In Aux Heater mode, sleep, 8-degree heating, turbo, and rotation functions
cannot be turned on.
9. When the mode is set to Aux Heater + Heat mode, the fan speed is auto wind.
At this time, Turbo and Rotation functions cannot be turned on, and the fan
speed cannot be adjusted.
10. Aux Heater mode and Aux Heat+Heat mode can be set only when it is
detected.
Set Temperature Setting
1. Press the button "
Temperature Range: 10/16/17/~30°C or 20~28°C (model dependant).
Fan Speed Setting
1. In the non-menu setting state, press "
setting function is unavailable under Auto or Dry mode.
2. Press "
" or "
the fan speed;
Rinnai
" or "
" to set the room temperature. Indoor Setting
0
8:
1 5
AM
High
Med
Low
Auto
" to select the fan speed, and then press "
" or "
" to select "
24
". Fan speed
" to change
DRCi R32 Wired Controller OIM
Advertisement
Table of Contents
