Table of Contents
Advertisement
EN71
Advanced f eatures
13. The focus does not adjust
13. • Focus is set to the Manual
13. •SetFocustotheAutomode.
automatically,
mode.
(_ pg. 45)
• The recording was done in a
• Clean the tens and check the
dark place, or the contrast
focus again. (_ pg. 77)
was low.
• The lens is dirty or covered
with condensation.
14. In the 5-Second mode,
14. • The 5-Second mode is set to
14. • Set"5S" to "5S" in MANUAL
recording ends before
"Anim/'
in MANUAL Menu.
Menu. (_;_ pg. 31, 36)
5 seconds have elapsed.
15. Snapshot mode cannot be
15. •The Squeeze mode
15. • Disengage the Squeeze
used.
(SQUEEZE) is selected.
(SQUEEZE) mode.
(_ pg. 31, 37)
16. The color of Snapshot looks
16. • The light source or the
16. • Find a white subject and
strange,
subject does not include
compose your shot so that it
white. Or there are various
also appears in the frame.
different light sources behind
(_ pg. 23, 42)
the subject.
• Disengage the Sepia (SEPIA)
• The Sepia (SEPIA) or
and Monotone
Monotone (MONOTONE)
(MONOTONE).
(_ pg. 3I,
mode is activated.
34)
IZ The image taken using
1Z •Shootingwasperformed
1Z • Press BACK LIGHT.
Snapshot is too dark.
under backlit conditions.
(_ pg. 47)
1& The image taken using
l& • The subject is too bright.
18. • Set "1_" to "SPOTLIGHT".
Snapshot is too bright.
(_ pg. 33)
19. White Balance cannot be
19. -The Sepia (SEPIA) or
19. • Disengage the Sepia (SEPIA)
activated.
Monotone (MONOTONE)
or Monotone (MONOTONE)
mode is activated,
mode before setting White
Balance. (_ pg. 34)
20. Wipe/Fader effects do not
2@ -ThePowerSwitchissetto
20. - Set the Power Switch to "[]'.
work.
"5".
(_ pg. 13)
21. The Black & White Fader does
2/. -The Sepia (SEPIA) or
21. • Disengage the Sepia (SEPIA)
not work.
Monotone (MONOTONE)
and Monotone
mode is activated.
(MONOTONE).
(_ pg. 31, 34)
2Z Program AE with special
22 • The Power Switch is set to
2Z • Set the Power Switch to "_'.
effects does not work.
"!11".
(_ pg. 13)
23. The image looks like the
shutter speed is too slow.
• When shooting in the dark,
the unit becomes highly
sensitive to light when
"GAIN UP" is set to
"AUTO".
23. • If you want the lighting to
took more natural, set "GAIN
UP" to "AGC" or "OFF".
(_ pg. 31, 35)
Advertisement
Table of Contents
