Table of Contents
Advertisement
4"0
EN
PLAYBACK MENUS
I VideoMenu
r_VIDEO
Synchro a djustment
For details, refer to "For More Accurate Editing"
(_ pg. 65).
SYNCHRO
(Factory-preset: -+0.0)
Playback s ound
During tape playback, the camcorder detects the
sound mode in which the recording was made, and
plays the sound back. Select the type of sound to
accompany your playback picture. According to the
menu access explanation on page 31, select
"SOUND MODE" or "12bit MODE" from the Menu
Screen and set it to the desired parameter.
SOUND MODE
(Factory-preset: STEREO IHI)
STEREO IH: Sound is output on both "L" and "R"
channels in stereo.
SOUND L _: Sound from the "L" channel is
output.
SOUND R _: Sound from the "R" channel is
output.
12bit MODE
(Factory-preset: SOUND 1 )
MIX: Original and dubbed sounds are combined
and output in stereo on both "L" and "R"
channels.
SOUND 1: Original sound is output on both "L"
and "R" channels in stereo.
SOUND 2: Dubbed sound is output on both "L"
and "R" channels in stereo.
NOTES:
• For GR-DV800/500
owners: You can also use
AUDIO button on the provided
remote control
(_;_pg. 56) to change the output sound (without
having to access the Playback Menu).
• The "SOUND MODE" setting is available for both
12-bit and 16.bit sound. (In previous models"
functions, "12-bit" is called "32 kHz" and "I 6-bit"
is called "48 kHz".)
• The camcorder cannot detect the sound mode in
which the recording was made during fast-forward
or rewind. During playback the sound mode is
displayed in the upper left corner.
Recording mode
Allows you to set the video recording mode (SP or
LP) depending on your preference. It is
recommended you use "REC MODE" in VIDEO
Menu when using this camcorder as a recorder
during dubbing. (_ pg. 52, 54)
REC MODE
(Factory-preset: SP)
SP/LP
NOTE:
_RECMODE _ can be set when the Power Switch is
set to "PLAY" or _'.
Dubbing f romtapeto memory c ard
17_ _._
COPY
(Factory-preset: OFF)
OFF: Enables snapshots to be taken during tape
ptayback.
ON: Enables dubbing of images recorded on a
tape to a memory card. (_ pg. 55)
Deleting thumbnail images
For details, refer to "To delete thumbnail
images"
(_ pg. 49).
NAVLDEL
IMAGE SEL / TAPE SEL / ALL / RETURN
S-Video/AV input
S/AV INPUT
(Factory-preset: OFF)
OFF: Enables audio and video signal input from
DV IN/OUT connector. (_ pg. 54)
ON: Enables audio/video signal input from the AV
and S-Video connectors. (_ pg. 52)
Advertisement
Table of Contents
