JVC GR-DV900 Instructions Manual page 6

6EN
How To Attach The Core Filter
(GR-DV800/500 only)
(for optional editing cable)
Attach the core filter to an optional editing cable.
The core filter reduces interference.
1 Release the stoppers on both ends of the core
filter.
Stopper
2
Run the cable through the core filter, leaving
approx. 3 cm (1-3/I 6"1 of cable between the
cable plug and the core filter. Wind the cable
twice around the outside of the core filter as
shown in the illustration.
• Wind the cable so that it is not slack.
3 cm (1-3/16")
Wind twice.
3
Close the core filter until it clicks shut.
How To Use The Audio Cable
When using optional headphones or external
microphone, connect to the provided Audio cable
(with a core filter attached), then connect the Audio
cable to the camcorder. The core filter reduces
interference.
Head
Audio cable
Microphone
connector cover.
NOTES:
• Take care not to damage the cable.
• When connecting a cable, attach the end with the
core filter to the camcorde_
-To MIC
(headphones)