Table of Contents
Advertisement
62
EN
USING THE REMOTE CONTROL UNIT (cont.)
Make Connections
Also referto page22.
Connector
Cover**
To S
To AV
To EDIT
Audio/Video
cable
(provided)
Yellow to
VIDEO IN
White to
AUDIO
LIN
/_l_ued
to
DIOR
Editing cable
(provided wffh GR-
DV900 only)
S-Video cable
(optional)
I
T° S'DVIZEgO e 'mNole
PAUSE or
RM-V717U
RM-V700U
(provided with GR-
(optional)
DV900 only)
Connect when your TV/VCR has an S-VIDEO IN
connector. In this case, it is not necessary to
connect the yellow video cable.
**
When connecting the cable, open the cover.
1 [] A IVC VCR equipped with a Remote PAUSE
connector...
...Connect the editing cable to the Remote
PAUSE connector.
[] A IVC VCR not equipped
with a Remote
PAUSE connector
but
equipped
with an
R.A.EDIT connector...
..Connect the editing cable to the R.A.ED[T
connector.
[] A VCR other than above...
...Connect the editing cable to the remote
control's PAUSE IN connector.
2
Insert a recorded tape into the camcorder.
3 Set the VIDEO/MEMORY
Swi/ch to "VIDEO".
4 Set the Power Switch to "PLAY" while pressing
down the Lock Button located on the switch.
5 Turn the VCR power on, insert a recordable tape
and engage the AUX mode.
• Refer to the VCR's instructions.
NOTES:
• ?heS-Video cable is optional. ?he Editing cable is
optional for GR-DVBO0/500. Be sure to use the
following cables:
• YTU94146B S-Video cable.
• PEAC0369-150 Editing cable.
Consult the JVC Service Center described on the
sheet included in the package for details on its
availability. Make sure to connect the end with a
core filter to the camcorder. The core filter
reduces interference.
• Before Random Assemble Editing, make sure the
indications cto not appear on the TV monitor
I/
they do_ they will be recorded onto the new tape.
Tochoose whether or not the following displays
appear on the connected TV...
• Date/time
Set "DATE/TIME" to "AUTO", "ON" or "OFF".
(_ pg. 31, 41) Or, press DISPLAY on the remote
control (provided with GR-DV900 only) to turn
on/off the date indication.
• Time code
Set "TIME CODE" to "OFF" or "ON".
(__*pg. 37, 47)
• Indications other than date/time and time code
Set "ON SCREEN" to "OFF'; "LCD" or "LCD/
TV'. O_ pg. 31, 41)
• When editing on a VCR equipped with a DV input
connector, an optional DV cable can be
connected instead of an S-Video cable and audio/
video cable.
Advertisement
Table of Contents
