3. Identify the Left and Right Upright Covers
(89, 90).
Slide the Left Upright Cover (89) onto the left
Upright (84), and slide the Right Upright Cover
(90) onto the right Upright. Press the Upright
Covers downward until they snap into place.
Then, remove and save the four indicated
5/16" x 2" Screws (2).
If there is a film covering the decal on each
Upright (84), carefully remove the film.
4. Remove and discard the four indicated screws
(A). Then, remove the Tray (79) from the Upright
Crossbar (76).
5. Carefully slide the Upright Crossbar (76)
between the Uprights (84). Attach the Upright
Crossbar with four 5/16" x 3/4" Screws (1); start
all four Screws, and then tighten them.
3
Film
2
84
89
4
A
79
5
1
84
10
2
84
Film
76
A
76
1
84
90