Table of Contents
Advertisement
Listening to broadcasts
|
ee
@ Displaying station names
Station names composed of up to four digits of charactrers and/or symbols can be displayed on the tuner display.
Example:
To receive FM 98.80 MHz, input its name with characters "CBE", and preset them under numeric key [3].
1 Receive FM 98.80 MHz, and enter the character input mode.
ry
ee
9880 -
ee
Blinks
V
TUNING
A
CHARACTOR
2 Select the characters to be displayed with that station.
® Display the desired character.
Types of characters that can
V TUNING
A
be innput
After having pressed the CHARACTER
key, press the TUNING key to display
the characters availabie.
ee
PATE oan
98765
3210
@ Establish the selection.
DIGIT
Blinking digit change to the next digit.
Biank position
® Repeat steps 1 and 2 until all of the required characters have
been input.
@ To select 'C', press the UP segment three times.
@ To insert a space, simply press the DIGIT key.
3 End the character input.
CHARACTOR
@
The character input also terminates automatically when fourth character has been input.
@
Press the CHARACTER key to terminate character input with three characters or less.
4 Preset them under key| 3 |.
@® Press the MEMORY key.
@® Press numeric key/3 |.
wtillee,
MEMORY)
goes off
Press while [MEMORY |is lighted.
(End of preset)
20 «R-vg030 (En?
Advertisement
Table of Contents
