Kenwood KR-V80 Instruction Manual page 22

Operation with video components
For the connections and operations, also read care-
fully the instruction manuals supplied with the video
components to be connected.
LD player
AUDIO OUT
Minitor TV
M@ Playback of video tape
1 Switch the power of the monitor TV ON.
2 Press the VIDEO 1 key.
VIDEO 1 Lights up.
VIDEO 2 VIDEO 1
The display shows the
present audio input.
@ When an input selector key other than VIDEO is pressed, the
audio input of the selected source will be played in place of
the audio input from VIDEO 1.
3 Play the VCR.
4 Adjust the volume.
22. KR-V8030 (En)
VIDEO 2 key
When connect to the KENWOOD LD player having system
control terminal, do not connect anything to the system con-
trol terminal of the LD player.
VIDEO 1 key
mM Recording of video source
Connect the video source component to be
recorded to the VIDEO 2 jacks.
@ A video player deck, video camera, LD player, DBS tuner, etc.,
can be connected.
2 Press the VIDEO 2 key.
VIDEO 2 Lights up.
The display shows the
present audio input.
@ When an input selector key other than VIDEO is pressed, the
audio input of the selected source wit! be played in place of
the audio input from VIDEO 2.
3 Play the video source component.
4 Put the VCR in the record mode.