Table of Contents
Advertisement
Connection of antennas
@ AM loop antenna connection
@ FM indoor antenna connection
The supplied antenna
is for indoor use.
For stable reception,
remove the indoor antenna after installing an outdoor antenna
as soon as possible.
i
Find the position that provides
best reception.
'2
Fix two ends with thumbtacks
or drawing pins.
The supplied antenna is for indoor use.
Place it as far as possi-
ble from the main system.
TV set, speaker cords and power
cord, and set it to a direction whichj provides the best reception.
Antenna stand
B AM outdoor antenna connection
if the reception is poor when the AM loop antenna is used,
distribute a vinyl-coated wire of more than 6 meters outdoors,
without disconnecting the loop antenna.
Connection method to each antenna terminal
1 Push lever down.
2
Insert conductor.
3.
Return lever up.
@ FM outdoor antenna connection
It is recommended to install an exclusive FM outdoor antenna to
capture FM broadcats with high should quality.
Use a@ coaxial cable for the connection
between
the outdoor
antenna and FM ANTENNA terminal on the rear panel.
For the
connection between the coaxial cable and FM ANTENNA termi-
nal, please refer to the iliustration.
Connection of coaxial cable
Treat the coaxial cable tip as shown
in the illustration, and fit
the cable the terminals.
8
KR-v8030 (En)
Advertisement
Table of Contents
