Table of Contents
Advertisement
Controls and indicators
I
eR
a
REMOTE SENSOR
Point the supplied remote control unit towards this sensor
and operate.
SPEAKERS A and B keys
Selects the speaker system to be used for listening.
The speaker system being used is shown on the display.
POWER key
Switches the power ON/STANDBY.
Power stand-by indicator
This indicator lights if the power cord is plugged into the
AC outlet. It is lit to show that the POWER key on the front
panel or the POWER
key on the remote control unit can
be activated.
PHONES jack
This jack accepts the standard stereo headphone plug.
When you wish to listen through headphones alone, set
the SPEAKERS keys (A and B) both to the OFF position.
EQUALIZER
LEVEL control keys
Adjust these keys up and down to equalize the sound level
of the indicated frequencies with in a range of +12 GB.
EQUALIZER
FREQUENCY
keys
These
keys are used to select the equalizing frequency
among 60 Hz, 150 Hz, 400 Hz, 1 kHz, 2.4 kHz, 6 kHz, and
15 kHz.
Equalizer preset MEMO.
key
This key is used to store an equalizer pattern the PGM
PRESET memory.
14
KRv9020 (En)
EQUALIZER
key
Press this key to ON and the frequency characteris-
tics of the sound will be modified
by the graphic
equalizer.
In the DEFEAT
position, the frequency characteris-
tics remain unchanged.
A_SPEAKERS
8
EQUALIZER
CHARACTER
DIOIT
v
TUNING
SS
ONASTAND RY
[———————— SUN =~ snes,
cHARcTER
PHONES
EQUALIZER LEVEL
MEMO. EQ.)SPI.
cafec
POMASET
'pm
|
—
So
eS
eso
«4
|
©)
| -
A
8
c
o
€
vid
B-p-5-p-o
°
|
FREQUENCY.
EQUALIZER
PR
pouey ?
—_=
PI
ES ST
ST |
EQUALIZER
PRESETS (A ~ E) keys
Use these keys to store equalizer patterns in memory
or to recall them.
Equalizer preset mode key (PGM/SET)
Each time this key is pressed, the recall mode of the
equalizer preset patterns alternates
between
PGM
(user programmed
patterns) and SET (factory preset
patterns.)
Advertisement
Table of Contents
