Table of Contents
Advertisement
System memory
a
ee
The required playback condition can be stored in memory
for each music source (tape, compact disc, phonograph
record (disc), or broadcasting program), so that the same
balance (between front and rear channels) and the same
equalizer pattern,
etc. can
be recalled at any time in-
stantly.
Two types of settings can be stored in memory, and by
pressing the appropriate SYSTEM MEMORY (M-1 or M-2)
key you
can
recall
the
preset
sound
field
condition
instantly.
Stored contents:
The stored contents in the System Memory are as follows:
® Input source (CD, PHONO, TUNER, TAPE, VIDEO, etc.)
{including TAPE 2)
@ Preset channel in the TUNER
position
@ Audio injection
@ EQUALIZER key setting (ON/DEFEAT)
© FQ. REC key setting (ON/OFF)
@ Preset channel of the equalizer pattern
© SURROUND
setting (ON/OFF)
@ SURROUND
mode
® Center mode
® Center level
® Delay time
© Rear level
@ Video monitor out
@ SPEAKERS A, B
@ CD DIRECT ON/OFF
KENWOOD 4uDI0-vIDEO STEREO RECEIVER KR-vS020
VOLUME
CONTROL
12 415 16
2
MDIGITAL DELAY SURROUND SYSTEM
7 e
a
a
—
EQUALIZER
[_——}
cwsgrany ey _ [twat
i
HPs.
CHARACTER © DIGIT
PULL OPEN
hay naug PRESET SYSTEM
HPRFace oate cincurr
@ How to preset the System Memory
1. Set the playback conditions as desired.
® When
selecting the tuner or equalizer, be sure to
designate the preset channel.
2. Press the SYSTEM MEMORY
key.
®The
indicator lights and the "SYSTEM
MEMORY 3" indication appears in the display (for 5
seconds).
@lf
the "CAN
NOT
MEMORIZE"
indication
is dis-
played, the tuner frequency or equalizer pattern will
not be preset in memory.
After
presetting
the playback
condition
for each
channel, press the MEMORY
key again.
Note:
If the
contents
of a preset
channel
is changed
after being
designated as the tuner or equalizer section channel for System
Memory, the contents of the System Memory channel will also be
changed.
32.
kR-v9020 (En)
DIRECT
FM
AM
P.3CAN
neo
oo
=
i
BALANCE
ag er
sen
M2
MEMORY
PRO
+ LOGIC
SYSTEM MEMORY M-1, M-2 keys
SYSTEM
MEMORY key:
Hf How to recall System Memory
1. Press the M-1 or M-2 key.
eThe
display
shows
"SYSTEM
MEMORY
1"
or
"SYSTEM
MEMORY
2" for about 2 second, and the
settings of each section are changed to the preset
contents.
2. Readjust the setting of each section as required.
@ When PHONO
is selected as the input source, with a
system-controlled turntable connected, the turntable
will automatically start playing by recalling the Sys-
tem Memory. Therefore, be sure to set a record on
the platter of the turntable
before
activating
the
System Memory function.
© In the same way, when a system-controlled tape deck
or CD player is connected to this unit, the tape deck
or CD player can be started automatically by activat-
ing the System Memory function.
Advertisement
Table of Contents
