Tape Dubbing - Kenwood KR-V9020 Instruction Manual

Hide thumbs Also See for KR-V9020:
Table of Contents

Advertisement

EQUALIZER key
KENWOOD Auol0-v1DE@ STEREO RECEIVER KR-v39020
Input selector keys
@ Operations using CD DIRECT key
To enjoy more
pure and high-quality sound of
Compact Discs:
1. Press the CD key
2. Press the CD DIRECT key.
3. Play the CD player.
® The CD DIRECT key is given priority over the setting
of the input selector keys.
@ The graphic equalizer cannot be used while the CD
DIRECT key is ON.
@To
cancel
the
CD
DIRECT
input,
press
the CD
DIRECT key again or press one of the input selector
keys (except CD and TAPE 2 keys). The input will be
switched to the source indicated on the display.
Notes. ——__-_-_____________
When
the CD
DIRECT
key is pressed in one of the Surround
modes (00 PRO-LOGIC,
THEATER
or HALL
SURROUND),
the
unit enters the Bypass mode.
CD DIRECT indicator
VOLUME
CONTROL
4S
6
2
DIGITAL CELAY SURROUND GYSTEM
[DoLBy SURROUND]
be
4
PRO - LOGIC
CD DIRECT key
@ To record an input source
1. Select
the
source
to be
recorded
with
the
input
selector keys.
2. Play the source.
3. Set tape deck 1 and/or tape deck 2 to record mode.
Note: ——__________
When a tape deck is connected to this unit with a System Control
cord, all of the input selector keys are disabled during recording
and do not function until recording is finished. This will prevent
the recording from being interrupted.
@ Tape dubbing
Tape recordings may be duplicated (dubbed) easily using
two tape decks connected to the TAPE 1 and 2 jacks.
For example:
(TAPE 1 to 2):
1. Connect two tape decks to the TAPE
1 and TAPE 2
jacks.
2. Press the TAPE
17 key.
3. Play back the recorded tape and adjust the recording
levels before starting tape dubbing.
(TAPE 2 to 1):
1. Press the TAPE 2 key.
2. Press a key other than TAPE
1 of the input selector
keys such as CD.
3. Play back the recorded tape and adjust the recording
levels before starting tape dubbing.
4. Do not press the TAPE
1: key during recording with
tape deck 1.
Note:
@
Seen
Adjust recording levels on the deck that is making the copy using
that deck's operating controls.
KR-V9020 (En)
19

Advertisement

Table of Contents
loading

Table of Contents