Operation Of Remote Control Unit - Kenwood KRX-792 Instruction Manual

Operation of remote control unit
Consult the instruction manuals for CD player (DP-492-DP-R792) or turntable (KD-491F) on how to use CD or turntable keys.
Other keys have the same function as those on the main system.
Keys indicated as [7] are not used with this unit.
4 ™ Loading batteries
Transmitter
1 Remove the cover.
KENWOOD
REMOTE CONTROL UNIT
Cassette Deck A
operation keys Se So
GEG Be Cassette Deck B
me) oo operation keys
CD player S&C)
Ppereton nes | | mwa ele Turntable
Tune pcan operation keys
opention keys Cita jm
GE
fam (aa [am
Input select 'nf httt1— MUTE k
eave
TAPEA TAPER
=
@ Insert two AA-size (R6/AA) batteries
mr eae ena:
[ah VOLUME CONTROL as indicated by the polarity marking
POWER key DOWN/UP keys
3 Close the cover.
SLEEP timer key
Model name: RC-892
Infrared system
M@ Operation procedure
Plug the power cord of the system into an AC wall | __}— Remote control light sensor
outlet, and press the key on the remote control
unit to turn the power on.
When the power is turned on, press the key of the source
component to be operated.
Approx.
@ When two operation keys on the remote control unit are pressed
successively, press each key securely reserving an interval of
more than 1 second for each press.
@ Components connected via the system control cords, such as the
CD player, can also be remote-controlled. In this case, please read
the instruction manual supplied with your CD player. Operating range
Notes:
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor. In such
a Case, change the system installation position to prevent the malfunction.
KRX-792 (En) 11