Table of Contents
Advertisement
FHookup3
sotieukns Asccenunnceeninngy Ce taweuasay Seca eeuitlgs eeGaii cabins San Gehnerenis
have cable TV).
Antenna hookup
A Use this hookup if you're using:
¢ VHF/UHF antenna (you get channels 2-13 and channels 14 and higher)
¢ UHF-only antenna (you get channels 14 and higher)
¢ separate VHF and UHF antennas
Rear
of TV
VHF/UHF
Match the type of
cates amt @ | A
connector on your
TV: A, B, or C.
B Use this hookup if you're using a VHF-only antenna (you get channels 2-13 only)
Rear of TV
VHF/UHF
Match the type of
Ss ath | A
connector on your
TV: A, B, or C.
For connector types
B and C, no UHF
connection is
required.
if you cannot connect your antenna cable to the VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach the
external antenna connector (not supplied) so that you can connect the
cable to the VHF/UHF IN jack. If you have separate cables for VHF and
UHF antennas, you may use a U/V
band mixer (not supplied). For
details, see page 72.
16 | Getting Started
Advertisement
Table of Contents
