Sony EV-S7000 Operating Instructions Manual page 21

Hookup 5: VCR setup
1 Set the RF UNIT switch to CH 3 or CH 4, whichever
channel is not used in your area. If both are used, set
the switch to either channel.
If you made A/V connections (from page 11), you can
skip this step.
AF UNIT
For details, see page 72.
2 Set the A/B switch to "A."
3 Set NORMAL/CATV to CATV:
Set NORMAL/CATV to
CATV and press EXECUTE.
Press MENU and select
TUNER PRESET.
Use 4 7 tO setect an
Use a V to select an
atem,then push EXECUTE item, then push 4 >
For details, see page 24.
4 Preset the channels into the VCR:
Press MENU and select
TUNER PRESET.
Select AUTO PRESET
and press EXECUTE.
MENU PAGE!
OTIMER SET/CHECK
SET UP MENU
TUNER PRESET
SET VCR Pluss CHANNELS
CABLE BOX CONTROL AFT
CLOCK SET FINE TUNING
TUNER PRESET CHS
NORMAL /CATYV NORMOCATY
PAUTO PRESET
MANUAL SET @ADD ERASE
@ON OFF
To etact AUTO PRESET.
push EXECUTE
Vee a to setect an
item, then push EXECUTE
For details, see page 24.
5 Preset the cable box output channel (usually 2, 3, or 4):
Press MENU and select
TUNER PRESET.
Set MANUAL SET to
ADD and press EXECUTE.
MENU PAGE! TUNER PRESET CH3
PTIMER SET/CHECK
SEY UP MENU
TUNER PRESET
SET VCR Pluss CHANNELS
CABLE BOX CONTROL
CLOCK SET
NORMAL/CATV @NORM CATV
AUTO PRESET
DMANUAL SET @ADD ERASE
AFT @ON OFF F
FINE TUNING
Use 4 7 to select an
Select CH with 0-9 Push
'lem, then push EXECUTE
ENTER 4 > to ADD/ERASE
For details, see page 27.
Hookup 5: VCR Plus+ channel setup
1 Find the VCR Plus+ Channel Listing in your program
S prog
guide. For details on the VCR Plus+ Channel Listing,
see page 30.
2 For unscrambled channels, if the channels in the
program guide are different from the channels that
you actually use on your TV, set the channels that are
different as follows:
Press MENU and select
SET VCR Plus+ CHANNELS.
Enter the program guide
channel, then the channel
you use on your TV.
PAGE!
SET VCR Prus+ CHANNELS
MENU
TIMER SET/CHECK
SET UP MENU
TUNER PRESET
DSET VCR Plus+ CHANNELS
CABLE BOX CONTAOL
CLOCK SET
GUIDE CH Tv CH
256 - 7§
Push 0-9 keys to set
program GUIDE CH
Use a2 7 lo select an
Or .push EXECUTE to see
item, then push EXECUTE
VCR Plus+ CHANNEL LIST
Program guide channel
Your actual TV channel
¥
Press EXECUTE.
For details, see page 31.
3 For scrambled channels, enter all the scrambled
channels you want to record and the cable box output
channel (usually 2, 3, or 4):
Press MENU and select
SET VCR Plus+ CHANNELS.
Enter the program guide
channel, then the cable box
output channel.
MENU PAGEt
TIMER SETI CHECK
SET UP MENU
TUNER PRESET
PSET VCR Plus+ CHANNELS
CABLE BOX CONTROL
CLOCK SET
SET VCR Pluse CHANNELS
GUIDE CH
33
Tv CH
3
Push 0-9 keys to set
Program GUIDE CH
Use 4 V to setect en
Or push EXECUTE see
stem,then push EXECUTE oes E '9
VCR Plus+ CHANNEL LIST
Program guide channel
Your cable box output channel
§
For details, see page 31. Press EXECUTE.
oS ee
Getting Started loa