Sony EV-S7000 Operating Instructions Manual page 17

Hookup 3: VCR setup Hookup 3: VCR Plus+ channel setup
1 Set the RF UNIT switch to CH 3 or CH 4, whichever 1 Find the VCR Plus+ Channel Listing in your program
channel is not used in your area. If both are used, set guide. For details on the VCR Plus+ Channel Listing,
the switch to either channel. see page 30.
If you made A/V connections (from page 11), you
can skip this step. 2 If the channels in the program guide are different
from the channels that you actually use on your TV,
set the channels that are different as follows:
Press MENU and select Enter the program guide
SET VCR Plus+ CHANNELS. channel, then the channel
you use on your TV.
MENU PAGE! SET VCR Plus+ CHANNELS
TIMER SETSCHECK
SET UP MENU
TUNER PRESET
PSET VCR Plus+ CHANNELS
CABLE BOX CONTROL Push 0-9 keys to set
CLOCK SET Program GUIDE CH
2 Set NORMAL/CATV to NORM: gna termes Bee Ake
stem, then push EXECUTE VCR Pluss CHANNEL LIST
For details, see page 72.
GUIDE CH TV CH
25 - 78
Program guide channel
Your actual TV channel
4
For details, see page 31. Press EXECUTE.
Press MENU and select Set NORMAL/CATV to
TUNER PRESET. NORM and press EXECUTE.
MENU PAGE! TUNER PRESET CHS
PTIMER SETICHECK
SET UP MENU PNORMAL/CATV @NORM CATV
TUNER PRESET AUTO PRESET
SET VCR Pluses CHANNELS MANUAL SET @ADO ERASE
CABLE 80X CONTROL AFT ON OFF
CLOCK Ser FINE TUNING
Vigsthen push EXECUTE Liescthin gare You are now ready to use your VCR
For details, see page 24. A Quick reference to operations is provided on the
back cover to help you quickly enjoy the basic
functions. These procedures differ slightly depending
on the hookup used. Make a note of which hookup you
3 Preset the channels into the VCR: used (Hookup 3) so that you can always follow the
correct instructions.
Press MENU and select Select AUTO PRESET
TUNER PRESET. and press EXECUTE.
MENU PAGE! TUNER PRESET CHS
PTIMER SET/CHECK
SET uP MENU NORMAL/CATV @NORM CATV
TUNER PRESET PAUTO PRESET
SET VCR Plus+ CHANNELS MANUAL SET @ADD ERASE
CABLE BOX CONTROL aft ;
CLOCK SET FINE TUNING
Use a ¥ to cetect on To start AUTO PRESET.
item, then push EXECUTE push EXECUTE
For details, see page 24.
Getting Started | 17