Table of Contents
Advertisement
P
E
RINTING ON
NVELOPES
For details on the envelopes that can be used, refer to "Usable Paper" in the Reference
Guide. The procedure to print on envelopes is as follows.
L
E
OADING
NVELOPES
You have to close the flaps of the envelopes and load them with the address side facing up
in the orientation shown in the diagram below.
Envelopes should be loaded with the flap side down and to be fed into the printer in the
direction indicated by the arrow.
The following explains how to load the envelopes, using COM-10 envelopes as an example,
in trays 1 to 4.
Important:
>
The reverse side of the envelope cannot be printed on.
NOTE
For details on the procedure to load paper in a paper tray, refer to
Paper" on page
1.
Load the envelopes in the portrait orientation so that the flaps
are turned to the right side.
2.
Slide the length guide and right width guide to the size of the
loaded envelopes.
3.
On the control panel, change the paper type to ENVELOPE. For
details, refer to "Setting Paper Types" in the Reference Guide.
4.
On the control panel, change the paper size of the tray to
COM-10 ENVELOPE. For details, refer to "Setting Custom Paper Sizes" in the
Reference Guide.
P
E
RINTING ON
NVELOPES
To print on envelopes, display the Tray/Output tab and Basic tab. This section explains
the procedure using WordPad on Windows XP as an example.
NOTE
The way to display the printer properties dialog box differs according to the
application software. Refer to the manual of each application software.
1.
From the File menu, select Print.
2.
Select this printer from the drop down list and click Properties.
3.
Click the Setup tab.
21.
Printing > 15
"Loading
Advertisement
Table of Contents
