Printing On Transparencies; Loading Transparencies - Oki ES6150 User Manual

4. Select the loaded paper tray from Source or click the Media Type and then select
Com10.
5. Click OK.
6. Click Print in the Print dialog box to start printing.
P T
RINTING ON RANSPARENCIES
L T
OADING RANSPARENCIES
Load transparencies in trays 1 to 4.
Important:
> Transparencies with white frames or full-colour transparencies cannot be used.
The way to load transparencies in the paper tray is the same as the way to load standard
size paper. For details, refer to
You must also set paper type for the paper tray to TRANSPARENCY on the control panel.
Refer to "Setting Paper Types" in the Reference Guide to change the setting.
P T
RINTING ON RANSPARENCIES
To print on transparencies, click on Properties from the File Print menu, click the Setup
tab. This section explains the procedure using WordPad on Windows XP as an example.
NOTE
> The way to display the printer properties dialog box differs according to
the application software. Refer to the manual of your respective
application software.
> Printing transparencies continuously may lead to the output
transparencies sticking to each other. As a guide, remove the
transparencies from the output tray after about 20 sheets and then fan
them to lower their temperatures.
1. From the File menu, select Print.
2. Select this printer as the printer to be used and click Preferences.
3. Click the Media Type drop down box and click on transparencies.
4. Select the loaded paper tray from Source Drop down and click on the tray that
contains the transparencies.
5. Click the Paper Size drop down.
6. From Paper Size, select the size of the original document.
7. Click OK.
8. Click Print in the Print dialog box to start printing.
" Loading Paper" (P.
Printing > 16
21).