BULB REPLACEMENT (continued)
Tabs
Tabs
Tabs
(5)
Push in the inner ring tabs to release
outer ring.
(6)
Lift and remove outer ring. Remove
inner ring from bulb. Replace GU10 bulb.
To re-assemble, simply reverse the steps
carefully and firmly into the recess, until you hear a positive snap.
*Observe all safety precautions before you proceed to turn ON breaker and range hood to test
for operation.
26
| CYCLONE
Tabs
Tabs
Tabs
Cap Connector
Outer Ring
GU10 LED
Inner Ring
(6)
to (2). To re-install,
tethered to
Range Hood
Bulb
(7)
press the bulb housing