Victory CYCLONE Installation Manual And User's Manual page 14

l l
W a
(3) Use knife and saw to cut out drywall to
accommodate plywood brace support. The
inserted plywood should be the same depth as
the drywall slab it is replacing.
Apply spackle in between spaces of
the plywood and drywall seamlessly.
14 | CYCLONE
ROUGH - IN (Continued)
Studs behind the wall
Use knife and saw
to cut out drywall.
Placement of
Range Hood
Placement of
Range Hood
l l
W a
(4) Fasten #8 2-½" woodscrews (not included)
to mount onto the plywood based on your earlier
measurements already established.
(5) Apply spackle in between spaces of the
plywood and drywall seamlessly. Sand down any
rough spackle to smooth out.
Paint area if required.
Screw on plywood
to exposed studs
(woodscrews not included)
Placement of
Range Hood