TransAct Ithaca 280 Programmer's Manual page 157

Programming Codes
Function Print the Electronic Journal
ASCII [ESC][GS]P< S
Hexadecimal 1BH 1DH 50H < S
Decimal <27> <29><80> < S
IPCL &%EP <S> <L> (L and S are 4 digits ie. 00100020 for 20 records starting
at 10)
EPOS
Description This command prints all or part of the electronic journal. <S
specifies the first record to be printed and <L
number of records to print. If <L
specified start to the last record are printed. Setting both start and end to
0 will print the complete contents of the electronic journal.
Note: The first record is identified as record 1.
Function Report the Electronic Journal
ASCII [ESC][GS]R< S
Hexadecimal 1BH 1DH 52H < S
Decimal <27> <29><82> < S
IPCL &%EQ <S> <L> (L and S are 4 digits ie. 00100020 for 20 records starting
at 10)
EPOS
Description This command reports all or part of the electronic journal. <S
<S > specifies the first record to be printed and <L
l
the number of records to report. If <L
the specified start to the end are reported. Setting both start and end to 0
will report the complete contents of the journal.
Note:
28-04430
>< S >< L >< L >
l h l h
>< S >< L >< L >
l h l h
>< S >< L >< L
l h l
>*256 + <L
h
>< S >< L >< L >
l h l h
>< S >< L >< L >
l h l h
>< S >< L >< L
l h l
The first record is identified as record 1.
The report format will be as follows:
[STX] Record number [SOH] Record Text [ETX]
...
[EOT]
Rev K
®
iTherm 280 Programmer's Guide
>
h
>*256 + <L
h
> are 0, records from the
l
>
h
>*256 + <L
h
>*256 + <L > are 0, all records from
h l
>*256 + <S >
h l
> specifies the
l
>*256 +
h
> specifies
l
Page 145