Table of Contents
Advertisement
19.2 Frost-proof the device
If the device is located in a room with
a risk of frost, e.g. in a holiday home,
empty the device completely.
Empty the device.
▶
→ "Transporting the device",
page 53
19.3 Transporting the device
To prevent damage to the device,
empty the device before transport.
Remark:To prevent residual water
from entering the controller and
damaging the device, only transport
the device in an upright position.
Remove crockery from the
1.
appliance.
Secure loose parts.
2.
Turn on the device.
3.
→ Page 32
Select the program with the
4.
highest temperature.
→ "Programs", page 18
Start the program.
5.
→ Page 33
To empty the appliance, cancel the
6.
program after approx. 4 minutes.
→ "Cancel programme",
page 34
Turn off the device.
7.
→ Page 34
Close the tap.
8.
To remove the remaining water
9.
from the appliance, disconnect the
inlet hose and let it drain.
Transport, storage and disposalNL
19.4 Disposal of your old
appliance
Valuable raw materials can be reused
through environmentally friendly
disposal.
WARNING
Risk of health hazard!
Children can lock themselves in the
appliance and endanger their lives.
In the case of discarded appliances,
▶
unplug the mains cable, then cut
the mains cable and damage the
appliance door lock to such an
extent that the appliance door no
longer closes.
Unplug the power cord from the wall
1.
outlet.
Cut the power cord.
2.
Dispose of the device in an environmentally friendly
3.
manner.
You can obtain information about the
current disposal methods from your
dealer and your municipal or district
council office.
This appliance is marked
in accordance with
with the European
directive 2012/19/EU on
waste
electrical and electronic
equipment (waste
electrical and electronic
equipment - WEEE).
The directive sets out the
framework for take-back
valid in the EU
and disposal of old
appliances.
53
Advertisement
Table of Contents
