Change Basic Settings - Bosch SMV6YCX00E User Manual

NLBasic settings
Basic setting
Remote Start
Factory setting
Factory setting (may differ depending on device type)
1

15.2 Change basic settings

Tip:Connect your device to a mobile
end device. You can easily make all
settings via the Home Connect app.
Open the appliance door.
1.
Press.
2.
Approx. up for 3 seconds
3.
to access basic settings.
aThe display shows Hxx.
38
display
Choice
text
rc1
rc0 - rc2
re
Start with
YES
To confirm
of
Busy-
Description
→ "Remote Start", page 40
activate or deactivate.
The following settings are
possible:
¡With the setting "rc0", the
function permanently
deactivated.
¡With the setting "rc1" you can
the function is selected
via the button.
→ "Activating Remote
Start", page 40
¡With the setting "rc2", the
function permanently
activated.
This basic setting is only
available after you have
connected the appliance to
the Home Connect app.
→ "Home Connect",
page 39
Reset changed settings to
the factory condition.
The settings for the first
commissioning must be
specified.
aappears on the display
to give.
Just as often
4.
until the display shows the desired
setting.
Just as often
5.
the display indicates the desired
value.
You can change multiple settings.
To save the settings, press for
6.
approx. 3 seconds
Close the appliance door.
7.
displayed
to press
press until
to press.